Sony CDP-CE535 Operating Instructions - Page 22

Recording From CDs 7 When you record on side B, reverse the tape and press · or P on the player to resume playing. To cancel Time Edit Press CONTINUE. You can program the tracks you want in advance Select the tracks before doing the above procedure. The player creates a program from the remaining tracks. You can freely specify the tape length Set the tape length using the ≠ AMS ± control in Step 3. Example: When the tape length of one side is 30 minutes and 15 seconds 1 To set the minutes, turn ≠ AMS ± until "30" appears in the display, then push ≠ AMS ±. 2 To set the seconds, turn ≠ AMS ± until "15" appears in the display, then push ≠ AMS ±. You can check and change the program See page 18. Fading In or Out You can manually fade the sound in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. ·P FADER EDIT/TIME FADE 0/) To Start play fading in End play fading out Press FADER During pause. FADE lights up in the display and the Q indication flashes. The play fades in. When you want to start fading out. FADE lights up in the display and the q indication flashes. The play fades out and the player pauses. Note Fading lasts for about 5 seconds. However, when you press the FADER button during Music Scan (see page 14), the play fades out for about 2 seconds. Changing the fading time You can change the fading time from 2 to 10 seconds before fading in or out. If you don't change it, fading lasts for 5 seconds. 1 Press FADER before you start playing. "FADE 5 SEC" appears in the display. 2 Press 0/) to specify the fading time. 22