Sony CDP-CE535 Operating Instructions - Page 14

Playing CDs Locating a Specific Track You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) control or number buttons on the remote. ≠ AMS ± Locating a Particular Point in a Track You can also locate a specific point in a track while playing a disc. >10 MUSIC SCAN =/+ Number buttons · To locate You need to The next or succeeding tracks Turn ≠ AMS ± clockwise until you find the track. When using the remote, press + repeatedly until you find the track. The current or preceding tracks Turn ≠ AMS ± counterclockwise until you find the track. When using the remote, press =repeatedly until you find the track. A specific track directly Z Press the number button of the track on the remote A track by scanning each track for 10 seconds Z (Music Scan) Press MUSIC SCAN on the remote before you start playing. When you find the track you want, press · to start playing. When you directly locate a track numbered over 10 Z Press >10 first, then the corresponding number buttons on the remote. To enter "0," use button 10/0. Example: To play track number 30 Press >10 first, then 3 and 10/0. You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. 0/) To locate Press A point while ) (forward) or 0 (backward) and monitoring the sound hold down until you find the point A point quickly by ) (forward) or 0 (backward) and observing the display hold down until you find the point. during pause You will not hear the sound during the operation. Note If "OVER" appears in the display, the disc has reached the end while you were pressing the ) button. Press 0 or turn ≠ AMS ± counterclockwise to go back. Playing Repeatedly You can play discs/tracks repeatedly in any play mode. REPEAT Press REPEAT while playing a disc. "REPEAT" appears in the display. The player repeats the discs/tracks as follows: 14