Sony CDP-CE535 Operating Instructions - Page 6
Connecting Another CD Player
View all Sony CDP-CE535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Connecting Another CD Player If you have a Sony CD player in which 5, 50, 200, or 300 discs can be inserted and which is equipped with the CONTROL A1 (or CONTROL A1) jack and the command mode of that player can be set to CD 3, you can control that player as the second player with this player. After connecting this player and an amplifier, follow the procedure below. Be sure to turn off the power of each player before making this connection. COMMAND MODE To LINE OUT CDP-CE535 To 2ND CD IN To CONTROL A1 To an AC outlet What cords will I need? • Audio cord (1) (Use the cord supplied with the player to be connected.) • Monaural (2P) mini-plug cord (1) (not supplied) 1 Connect the players with an audio cord (see also "Hookups" on page 5). CDP-CE535 2ND CD LINE IN OUT L R CDP-CX300, etc. LINE OUT L R 2 Connect the players with a monaural (2P) mini- plug cord. CDP-CE535 CONTROL A1 CDP-CX300, etc. CONTROL A1 To audio output CDP-CX300, etc. To CONTROL A1 To an AC outlet To audio input Amplifier : Signal flow To an AC outlet For details on this connection, refer to the supplementary "CONTROL-A1 Control System" instructions. 3 Set the COMMAND MODE selector of each player. Set the COMMAND MODE selector of this player to CD 1 or CD 2, and set that of the second player to CD 3. COMMAND MODE CD 123 For details on how to operate the second player, see "Controlling Another CD Player" on page 18 and "Playing Alternately" on page 20. 6