Sony DPF X1000 Operating Instructions - Page 47

Advanced operations Adjusting the image size and position Enlarging/reducing an image You can enlarge or reduce an image in single view mode. 1 To enlarge an image, press (zoom in) on the remote control. To reduce an enlarged image, press (zoom out). Each press of the button enlarges the image further. You can enlarge an image to a maximum of 5 times the original scale. You can move an enlarged image up, down, left, and right. About crop and save • The screen currently displayed is saved as it was trimmed after you press B/b/v/V to move the enlarged image and then press the MENU button. • You can select [Save as new image] or [Overwrite] by pressing the MENU button when the image is enlarged or reduced. Press v/V to select the method used to save the image. • If you select [Save as new image], the image is saved as a new image. • If you select [Overwrite], the image is overwritten. A confirmation screen is displayed when you select [Overwrite]. Go to step 4 on page 46. Notes • Enlarging an image may reduce the quality depending on the image size. • It is not possible to enlarge an image using the buttons on the photo frame. Rotating an image Press ROTATE ( ) on the remote control. Each press of the button rotates the image 90 degrees counter-clockwise. Operate from the menu of the photo frame 1 Press MENU in single display mode. The menu is displayed. 2 Press B/b to select the tab. (Editing) The screen used for editing is displayed. 3 Press v/V to select [Rotate] and then press . The Rotate menu is displayed. 4 Press v/V to select the direction to rotate and then press . •: Rotates the image 90 degrees clockwise. •: Rotates the image 90 degrees counterclockwise. 5 Press v/V to select [OK] and then press . Note An enlarged image cannot be rotated. Continued 47 GB