Sony DVD Duplicator User Guide - Page 12

DVD Duplicator Series 3. Use the down arrow button to display the 9. Image function. Press the ENT button to select the Image function. Note that the LCD panel display shows which partition of the hard drive the DVDs contents (Image) will be load into. (To learn more about how to select a particular partition on the hard drive, see page 16). In the following example, the image will be loaded into hard drive partition A: 4. Press the ENT button. The LCD panel display will indicate the status of the load process by displaying the percent of the DVD's contents that have been loaded, the number of tracks that have been loaded, etc. In the following example, we can see that the contents of the Master DVD are being loaded into partition A of the hard drive. This particular "snapshot" shows that 18 percent of the DVD has been copied, 2851.5 MB of data remains to be copied, and 7 minutes and 26 seconds is the estimated time to complete the copy from the master DVD to the hard drive: When the load process is complete, the system will beep and display the following message: You have now completed the process of loading a master DVD onto the hard drive. 5. Remove the master DVD from the Master (Source) drive. ©2005 Kingdom, Inc. All rights reserved Ver: 1.0 Page - 11 of 34 User's Guide