Sony DVD Duplicator User Guide - Page 14
Select Source - different drives
UPC - 837654184592
View all Sony DVD Duplicator manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DVD Duplicator Series 5. Then press the ESC button to return to the list of functions and use the up and down arrow keys to redisplay the 1. Copy function. Note that the Copy function now indicates the hard disc is the source of data. In the following example, the hard disk partition that is the "source" is partition A: The copy function is indicating that it will be copying from partition A of the hard drive. To learn how to select a different partition, refer to page 16. 6. With the copy function displayed in the LCD panel, place blank DVDs in the available disc drives and press ENT button. The system will scan for blank DVDs and then write to those DVDs, copying the data from the displayed partition letter of the hard drive. Note that the DVD drives that are being written to from the hard drive have a blinking light, indicating that the copy session is in progress. The status of the copy operation is indicated in the LCD panel display. In the following example, the "snapshot" shows that 1256.7 MBs of the data remain to be copied from partition A, and that 44% of the data has already been copied, and that the remaining time for the copy process is 22 minutes and 34 seconds. 7. When the copy process completes, the disc drawers will automatically open and the LCD panel display will indicate the status. In the following example, 7 DVDs were successfully written to from partition A of the hard drive: You have now completed the process for using the hard drive to make DVD duplicates. 8. Press the ESC button and note that the system is still set to copy from partition A unless you select a different source (using the 8.Select Source function) ©2005 Kingdom, Inc. All rights reserved Ver: 1.0 Page - 13 of 34 User's Guide