Sony DVD Duplicator User Guide - Page 19
Advanced Functions - target
UPC - 837654184592
View all Sony DVD Duplicator manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
DVD Duplicator Series Chapter 4 Advanced Functions Testing (Simulating) the Copy Process The 2.Test function is used to simulate the copying process. When the simulation (test) finishes, no data will be written to the DVD. How to use the 2.Test function: 1. Use the down arrow button to scroll down to the 2.Test option. 2. The system will test the source and the target destination. If using the DVD-RW as the source, put a source DVD into the DVD-RW (top disc drawer) blank DVDs into the writers. If using a partition on the hard drive, ensure the correct hard disk partition is displayed. If you use rewritable discs that contain data, the old data will be quickly erased before simulation. 3. Press ENT to start the simulation (test). The LCD panel will display the testing information and when the test ends, the LCD will show the results. Testing and Copying DVDs The 3.Test & Copy function is used to test the copying process and then actually copy the source to the destination discs. How to use the 3.Test & Copy function: 1. Use the down arrow button to scroll down to the 3.Test & Copy function. 2. The system will test the source and the target destination and then automatically start the copy process. If using the DVD-RW as the source, put a source DVD into the DVD-RW (top disc drawer), and blank DVDs into the writers. If using a partition on the hard disk, ensure the correct hard disk partition is displayed in the LCD panel along with the Test and Copy function. If you use rewritable discs that contain data, the old data will be quickly erased before simulation. 3. Press ENT to start the test and copy process. The LCD panel will display the testing information, the copy information, and the results. It will automatically eject the duplicated DVDs when the process is finished. Verifying the Target (Duplicate) DVDs The 4.Verify function is used to examine if the target DVDs can be read correctly after copying. How to use the 4.Verify function: 1. Begin by copying a Master DVD or data from a partition in the hard drive to a target ©2005 Kingdom, Inc. All rights reserved Ver: 1.0 Page - 18 of 34 User's Guide