Sony DVD Duplicator User Guide - Page 20
Comparing the Source and Target after Copying, Prescanning the Master Source DVD
UPC - 837654184592
View all Sony DVD Duplicator manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
DVD Duplicator Series (slave, destination) DVD. You can use the 1.Copy function or the 3.Test and Copy function to do this. When the copy process is done, the system will automatically eject the duplicated disc(s). Press the ESC button to redisplay the function and re-insert the disc(s) 2. Use the down arrow button to display the 4.Verify function and press ENT button to start the verify process. The system will start to verify the DVDs in the target drives. The LCD panel will display the verify process information and the results. It will automatically open all disc drives of the verified discs when the process is complete. Comparing the Source and Target after Copying The 5.Compare function compares the source DVD and the target DVD after copying. How to use the 5.Compare function: 1. Begin by copying a master DVD to a target (slave, destination) DVD. You can use the 1.Copy function or the 3.Test and Copy function to do this. Press the ESC button to redisplay the function. 2. Ensure that the source and the copied target DVDs are in their respective drives. 3. Use the down arrow button to scroll down to the 5.Compare function, and press the ENT button to start the Compare process. The LCD panel will display the compare information and the results. When the process completes, the target DVDs will be automatically ejected. 4. Press the ENT button to view the detail of the Compare information. If the compare result is identical, then the LCD panel will display the message "Identical". If the result of the compare process is "Fail" then the message will show the number of discs that failed and succeeded. Press ENT button to view the detail of the Compare information. If the compare failed, the LCD panel will display the reason of the failure such as "TOC not match". 5. Press the ESC button to redisplay the 5.Compare function. Prescanning the Master (Source) DVD The 6.Prescan function is used to scan the master (source) DVD to determine if it can be read correctly and to test the read speed. How to use the 6.Prescan function: 1. Place the Master DVD in the DVD-RW drive (source). 2. Use the down arrow button to display the 6.Prescan function. 3. Press the ENT button to start the prescan process. The system will scan the Master DVD and the LCD panel will display the scanning information and the results. If the master DVD can be read correctly, then the message "Prescan OK!" appears in the ©2005 Kingdom, Inc. All rights reserved Ver: 1.0 Page - 19 of 34 User's Guide