Sony DVD Duplicator User Guide - Page 28

DVD Duplicator Series Burn On the Fly This option controls the writing methods to the DVD. When this setting is ON, the data will direct copy from the source drive to the target drives. When the setting is OFF, the data will load into a particular temporary partition in the hard drive and then the copied data will come from the source partition. Burn Mode This option controls the writing methods to the DVD including the "Disc At Once" (DAO) or "Track at once" (TAO). The default setting is Disc At Once. Some DVD writers may support different writing methods. If the method selected is not supported, the duplicator will automatically switch to the other one. Display Time This option is to show the copying time. Button Sound This option controls whether the button sound is ON or OFF. The default setting is ON. Device Info This option shows what drives are installed. System Info This option shows the system information of the LCD such as the internal firmware revisions. Quick Erase This option initiates a quick erase of the data on the DVD-RW disc. Full Erase This option will do a complete erase of the data on the DVD-RW disc. This will take a minute to complete. Auto Close Tray Auto Close Tray is to close the writer's tray automatically. If you haven't set any writer's to copy in Function 11.5 Auto Start Drive this function will be invalid. Quick Compare This option is related to Function 5 Compare. It lets you set a certain byte. When the error of a target DVD is beyond the set byte, the comparison between the source DVD and the target DVD will stop. Yet the comparison of the other target DVDs will continue. Audio Burn Speed Audio Burn Speed lets you control the burning speed of audio CDs. The default is auto. ©2005 Kingdom, Inc. All rights reserved Ver: 1.0 Page - 27 of 34 User's Guide