Sony DVP-NC615 Operating Instructions - Page 16
Step 3: TV Hookups, For Asian/Oceanian models only - image
View all Sony DVP-NC615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 3: TV Hookups Connect the supplied audio/video cord and the power cord in the order (1~3) shown below. Be sure to connect the power cord last. CD/DVD Player to LINE OUT L/R (AUDIO) LINE OUT to LINE OUT (VIDEO) to video input 3 Power source TV 1 Audio/video cord (supplied) to audio input l : Signal flow 2 Power source Depending on the TV type, the image of some discs may not fit your TV screen. If you want to change the aspect ratio, please refer to page 63. When connecting to a monaural TV Use a stereo-mono conversion cord (not supplied). Connect the LINE OUT (VIDEO) jack on the player to the TV's video input jack, and connect the LINE OUT L/R (AUDIO) jacks to the TV's audio input jack. For Asian/Oceanian models only To change the color system The color system of the player is set to NTSC or PAL. If the on-screen menu of the player does not appear on the TV, change the color system of the player to the same color system (PAL or NTSC) of your TV. To change the color system, hold ?/1 down for a few seconds while pressing X on the player. z Hint To check the current setting of the player's color system, press ?/1. The ?/1 indicator lights up in green. When "NTSC" appears on the front panel display, the color system of the player is set to NTSC. When "NTSC" does not appear, the color system is set to PAL. 16