Sony DVP-NC615 Operating Instructions - Page 68
Additional Information, Troubleshooting, Power, Picture, Sound, Operation - repair
View all Sony DVP-NC615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Additional Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. , Check that the AC power cord is connected securely. Picture There is no picture/picture noise appears. , Re-connect the connecting cord securely. , The connecting cord is damaged. , Check the connection to your TV (page 18) and switch the input selector on your TV so that the signal from the player appears on the TV screen. , The disc is dirty or flawed. , If the picture output from your player goes through your VCR to get to your TV or if you are connected to a combination TV/ VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience problems even when you connect your player directly to your TV, please try connecting your player to your TV's S VIDEO input (page 18). , If the color system of your player does not match with that of your TV, change the color system of the player. For details, see page 16. (You cannot change the color system of the DVD disc itself.) Even though you set the aspect ratio in "TV TYPE" of "SCREEN SETUP," the picture does not fill the screen. , The aspect ratio of the disc is fixed on your DVD. The picture is black and white. , Depending on the TV, the picture on the 68 screen becomes black and white when you play a disc recorded in the NTSC color system. Sound There is no sound. , Re-connect the connecting cord securely. , The connecting cord is damaged. , The player is connected to the wrong input jack on the amplifier (receiver) (page 22, 23, 24). , The amplifier (receiver) input is not correctly set. , The player is in pause mode or in Slowmotion Play mode. , The player is in fast forward or fast reverse mode. , If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the audio settings (page 66). , While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select "2:STEREO," "2:1/L" or "2:2/R." Sound is noisy. , When playing a CD with DTS sound tracks, noise will come from the LINE OUT L/R (AUDIO) jacks or DIGITAL OUT (COAXIAL) jack (page 28). Sound distortion occurs. , Set "AUDIO ATT" in "AUDIO SETUP" to "ON" (page 65). The sound volume is low. , The sound volume is low on some DVDs. The sound volume may improve if you set "AUDIO DRC" to "TV MODE" (page 65) and set "DOWNMIX" to "NORMAL" (page 66). , Set "AUDIO ATT" in "AUDIO SETUP" to "OFF" (page 65). Operation The remote does not function. , There are obstacles between the remote and the player. , The distance between the remote and the player is too far. , The remote is not pointed at the remote sensor on the player. , The batteries in the remote are weak.