Sony DVP-NC615 Operating Instructions - Page 29
Additional operations, Notes on playing DVDs with a DTS sound, track
View all Sony DVP-NC615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
be connected to the digital jack of the player. • Set the sound to "STEREO" using the AUDIO button when you play DTS sound tracks on a CD (page 46). • Do not play DTS sound tracks without first connecting the player to an audio component having a built-in DTS decoder. The player outputs the DTS signal via the DIGITAL OUT (COAXIAL) jack even if "DTS" in "AUDIO SETUP" is set to "OFF" in the Setup Display (page 67), and may affect your ears or cause your speakers to be damaged. Notes on playing DVDs with a DTS sound track • DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack. • When you play a DVD with DTS sound tracks, set "DTS" to "ON" in "AUDIO SETUP" (page 67). • If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to "ON" in "AUDIO SETUP" (page 67). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged. Additional operations LOAD DISC SELECT ./> HX x A DISC SKIP Playing Discs To Operation Select a disc Press DISC SELECT 1-5 on the player Stop Press x Pause Press X Resume play after pause Press X or H Go to the next disc Press DISC SKIP Go to the next chapter, Press > track, or scene in continuous play mode Go back to the Press . previous chapter, track, or scene in continuous play mode Stop play and remove Press Z the disc Replay the previous Press REPLAY scene (DVD only) Check if a disc is in the disc compartment Press LOAD on the player. The disc number indicators on the front panel display (1-5) light up. c continued 29