Sony FWD-42PV1 Operating Instructions - Page 30
Setting the Aspect
View all Sony FWD-42PV1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Picture Enlargement 4 Press M/m to move the cursor (yellow) to "Auto Wide" and press ENTER. The following menu appears on the screen. SCREEN CONTROL Wide Setup Auto Wide: 4:3 Mode: Ofnf OWnide Zoom Select Set ENTER Exit MENU 5 Select the Auto Wide setting with M/m. Off: Images are reproduced as-is. On: The image is enlarged and displayed in the most appropriate aspect ratio. 6 Press ENTER. The screen returns to the screen shown in step 3. 7 Select "4:3 Mode" with M/m and press ENTER. The following menu appears on the screen. SCREEN CONTROL Wide Setup Auto Wide: 4:3 Mode: On NWoidrme aZloom Wide Zoom Select Set ENTER Exit MENU 8 Select the 4:3 Mode with M/m. Normal: Pictures with a 4:3 aspect ratio are displayed as-is. Wide Zoom: Pictures with a 4:3 aspect ratio are displayed after being enlarged to an aspect ratio of 16:9. 9 Press ENTER. The menu returns to the Wide Setup menu. Note While inputting DVI or RGB signals, you cannot set the Auto Wide because the Auto Wide function does not work. Setting the Aspect Pictures can also be enlarged to the desired wide mode regardless of the type of picture. 1 In the SCREEN CONTROL menu, press M/m to move the cursor (yellow) to "Aspect" and press ENTER. The following menu appears on the screen. SCREEN CONTROL Multi Display Setup Wide Setup Aspect: Adjust Screen Wide Zoom Zoom Subtitle Full Normal Select Set ENTER Exit MENU 2 Select the Aspect with M/m. Wide Zoom: Enlarges 4:3 pictures full-screen to 16:9 pictures. Zoom: Enlarges the picture all the way to the left and right edges of the screen. (Black bars may remain on the top and bottom of the screen, depending on the type of picture.) Subtitle: Enlarges the picture all the way to the left and right edges of the screen and compresses only the area where captions are displayed. Full: Extends the left and right sides of the picture to cover the entire screen without changing the top and bottom. Normal: Displays the picture without enlarging it. 3 Press ENTER. The menu returns to the SCREEN CONTROL menu. Notes • You cannot set the Aspect while using the PICTURE AND PICTURE function or the Multi Display. • If you set Aspect, the Auto Wide function is disabled. If you want to use the Auto Wide function, reset it to "On." • The top or bottom of the picture may be cut off or the captions may not completely be displayed on the screen depending on the type and size of picture. • Please note that showing enlarged/compressed pictures for commercial purposes or public viewing at hotels or coffee shops can be copyright infringement as defined under the copyright laws. 30 (GB)