Sony HDR SR10 Operating Instructions - Page 17
Connecting to other devices - accessories
UPC - 027242727779
View all Sony HDR SR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
qd EASY button Press EASY to display and most of the settings are set automatically for easy recording/playback. To cancel, press EASY again. qf DISP/BATT INFO button You can switch the screen display when you press while the power is set to on. When you press while the POWER switch is set to OFF (CHG), you can check the remaining battery. qg . (back light) button Press . (back light) to display . for adjusting the exposure for backlit subject. Press . (back light) again to cancel the backlight function. qj Built-in microphone Sound picked up by the internal microphone is converted to 5.1ch surround sound and recorded. qk Flash The flash will flash automatically depending on recording conditions in the default setting. Touch (HOME) t (SETTINGS) t [PHOTO SETTINGS] t [FLASH MODE] to change the setting. ql Remote sensor/Infrared port Receives the signal from the Remote Commander. w; Camera recording lamp The camera recording lamp lights up in red during recording. The lamp flashes when the remaining media capacity or battery power is low. wa Tripod receptacle (Bottom surface) Attach a tripod (optional) to the tripod receptacle using a tripod screw (optional: the length of the screw must be less than 5.5 mm (7/32 in.)). Connecting to other devices 5 HDMI OUT (mini) jack Connect with the HDMI cable (optional). 6 A/V Remote Connector/A/V OUT jack Connect with the component A/V cable or A/V connecting cable. 7 (USB) jack Connect with the USB cable. qs (DISC BURN) button Create a disc by connecting the camcorder to a computer, etc. For details, see "PMB Guide" (p. 26). qh Active Interface Shoe The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. ws Interface connector Connect your camcorder and the Handycam Station. US 17 Recording/Playback