Sony HDR SR10 Operating Instructions - Page 9
Available running time for the, supplied battery pack, To charge the battery pack using only - high definition handycam
UPC - 027242727779
View all Sony HDR SR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
To charge the battery pack using only the AC Adaptor Turn the POWER switch to OFF (CHG), then connect the AC Adaptor directly to the DC IN jack on the camcorder. POWER switch With the v mark on the right DC plug DC IN jack Open the jack cover. Available running time for the supplied battery pack Charging time: Approximate time (min.) required when you fully charge a completely exhausted battery pack. Recording/Playback time: Approximate time (min.) available when you use a fully charged battery pack. "HD" stands for high definition image quality, and "SD" stands for standard image quality. Hard disk HD SD (Unit:min.) "Memory Stick PRO Duo" HD SD Charging time 135 Recording time*1*2 Continuous recording time 90 110 90 110 Typical recording time*3 Playback time*2 40 50 40 50 130 130 130 130 *1 [REC MODE]: SP *2 When the LCD backlight is on *3 Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. On the battery pack • When you remove the battery pack or disconnect the AC Adaptor, turn the POWER switch to OFF (CHG) and make sure that the (Movie) lamp/ (Still) lamp (p. 10)/ ACCESS lamps (p. 12, 16) are turned off. • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or the Handycam Station, even when the power cord (mains lead) is disconnected from the wall outlet (wall socket). On the charging/recording/playback time • Times measured when using the camcorder at 25°C (77°F) (10°C to 30°C (50°F to 86°F) is recommended). • The available recording and playback time will be shorter when you use your camcorder in low temperatures. • The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. • Even if your camcorder is turned off, AC power source (mains) is still supplied to it while connected to the wall outlet (wall socket) via the AC Adaptor. US 9 Getting Started