Sony HT-SF470 Operating Instructions - Page 36
If a wrong frequency is entered, If you cannot tune in a station, Tuning into a station directly
UPC - 027242792869
View all Sony HT-SF470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Tuning into a station directly (Direct Tuning) Enter the frequency of a station directly by using the numeric buttons. 1 Press TUNER repeatedly to select the FM or AM band. You can also press INPUT SELECTOR +/- on the receiver. 2 Press D.TUNING. 3 Press and hold SHIFT, then press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. 4 Press and hold SHIFT, then press ENTER. If a wrong frequency is entered "FM ---.--" or "AM ----" appears and then the display returns to the current frequency. If you cannot tune in a station Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area. Changing the AM tuning interval The AM tuning interval can be set to either 10 kHz or 9 kHz. 1 Press TUNER repeatedly until "AM" appears on the display. 2 Press MENU/HOME. 3 Press V/v repeatedly until "AM STEP" appears on the display, then press or b. "10K t 9K" or "9K t 10K" appears on the display. 4 Press . "COMPLETE" appears on the display. The AM tuning interval is changed. 5 Press MENU/HOME. Note If you change the interval, AM preset stations will be erased. 36US