Sony HT-SF470 Operating Instructions - Page 51

S-AIR Operations Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) To establish sound transmission, you need to set the same ID for your S-AIR main unit and S-AIR sub unit. However, if your neighbors have S-AIR products and their IDs are the same as yours, your neighbors could receive the sound of your S-AIR main unit or vice versa. To prevent this, you can pair the S-AIR main unit with a specific S-AIR sub unit by performing the pairing operation. x Before pairing Sound transmission is established by the ID. Your room S-AIR main unit (this receiver) POWER/ ACTIVE STANDBY MASTER VOLUME ID A Neighbor ID A S-AIR sub unit ID A S-AIR sub unit x After pairing Sound transmission is established between the paired S-AIR main unit and S-AIR sub unit(s) only. Your room S-AIR main unit (this receiver) POWER/ ACTIVE STANDBY MASTER VOLUME ID A Neighbor No transmission ID A S-AIR sub unit ID A S-AIR sub unit Pairing To perform pairing 1 Place the S-AIR sub unit that you want to pair near the S-AIR main unit. Note Remove headphones from the surround amplifier (if connected). 2 Match the IDs of the S-AIR main unit and the S-AIR sub unit. • To set the ID of the S-AIR main unit, see "To set the ID of the S-AIR sub unit" (page 50). • To set the ID of the S-AIR sub unit, refer to the operating instructions supplied with the S-AIR sub unit. 3 Press AMP MENU. "LEVEL" appears on the display. 4 Press V/v repeatedly until "S-AIR SET" appears, then press or b. continued 51US