Sony HT-SF470 Operating Instructions - Page 69

HDMI The source sound input to the HDMI jack on the receiver is not output from the receiver or the TV speaker. • Check the HDMI connection (page 21). • Make sure "CTRL HDMI" is set to "CTRL ON" in SET HDMI menu. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component. • Be sure to use a High Speed HDMI cable when you view images or listen to sound during Deep Color or 3D* transmission. The source image input to the HDMI jack on the receiver is not output from the TV. • Check the HDMI connection (page 21). • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component. • Be sure to use a High Speed HDMI cable when you view images or listen to sound during Deep Color or 3D* transmission. The Control for HDMI function does not work. • Check the HDMI connection (page 21). • Make sure "CTRL HDMI" is set to "CTRL ON" in SET HDMI menu. • Make sure the connected component is compatible with the Control for HDMI function. • Check the Control for HDMI settings on the connected component. Refer to the operating instructions of the connected component. • Repeat the procedures of "Preparing for the "BRAVIA" Sync" if you change the HDMI connection, connect/disconnect the AC power cord, or there is a power failure (page 39). No sound is output from the receiver and TV speaker while using the System Audio Control function. • Make sure the TV is compatible with the System Audio Control function. • If you cannot listen to the sound of a component connected to the receiver - Select the appropriate input when you want to watch a program on a component connected via HDMI connection to the receiver. - Change the TV channel when you want to watch a TV broadcast. - Select the component or input you want to watch when you watch a program on the component connected to the TV. Refer to the operating instructions of the TV on this operation. When the receiver is in standby mode, there is no image or sound on the TV. • When the receiver is in standby mode, image and sound are output from the HDMI component selected the last time you turned off the receiver. If you are enjoying other component, play the component and perform the One-Touch Play operation, or turn on the receiver to select the HDMI component you want to enjoy. • Make sure "PASS THRU" is set to "THRU ON" in the SET HDMI menu if you connect components not compatible with the "BRAVIA" Sync to the receiver (page 44). The volume turns down when the output method changes from the TV speaker to the speakers connected to the receiver. • The Volume Limit function is working (page 42). *Except for HT-SS370, models of area code U2 only Additional Information continued 69US