Sony HT-SF470 Operating Instructions - Page 60
To adjust the speaker levels, LEVEL menu
UPC - 027242792869
View all Sony HT-SF470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
a) For details, see "Enjoying the sound at low volume (NIGHT MODE)" (page 34). b)This parameter is only available when SAT/CATV input is selected. c)For details, see "Preparing for the "BRAVIA" Sync" (page 39). d)This parameter is only available when "CTRL HDMI" is set to "CTRL ON". e) When the Auto Calibration result is saved, you can adjust the setting in 1 inch (1 cm) increment. f) This parameter is only available when "CENTER SP" is set to "CENTER YES". g)This parameter is only available when "SUR SP" is set to "SUR YES". h)For details, see "Performing Auto Calibration" (page 26). i) This parameter is only available when the result of the Auto Calibration is saved. j) This menu is only available when you insert the S-AIR transmitter (not supplied). For details, see "Setting up an S-AIR product" (page 48). k)"FEET" for models of area code U2, CA2 only. "M CM" for models of area code AR2 only. LEVEL menu You can adjust the level of each speaker to suit your preference. x TEST TONE You can adjust the speaker levels while listening to the test tone from your listening position. To adjust the speaker levels x FL LEVEL (Front left speaker level) x CNT LEVEL (Center speaker level) x FR LEVEL (Front right speaker level) x SR LEVEL (Surround right speaker level) x SL LEVEL (Surround left speaker level) x SW LEVEL (Subwoofer level) 1 Press V/v repeatedly until "TEST TONE" appears, then press or b. 2 Press V/v repeatedly until "T. TONE ON" appears, then press . The test tone is emitted from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Subwoofer 3 Press B until "TEST TONE" appears. 4 Press V/v repeatedly to select the desired speaker, then press or b. The test tone is emitted from the speaker that is being adjusted only. • FL LEVEL, CNT LEVEL, FR LEVEL, SR LEVEL, SL LEVEL, SW LEVEL Notes • "CNT LEVEL" does not appear when you set "CENTER NO" in the "SP SETUP" setting. • "SR LEVEL" and "SL LEVEL" do not appear when you set "SUR NO" in the "SP SETUP" setting. 5 Press V/v repeatedly to adjust the speaker level, then press . You can adjust from -6.0 dB to +6.0 dB in 0.5 dB steps. Note If you do not adjust for a certain period, the test tone is emitted from the next speaker in sequence. 60US