Sony HT-SF470 Operating Instructions - Page 42
Using the Volume Limit function, Press AMP MENU.
UPC - 027242792869
View all Sony HT-SF470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Using the Volume Limit function When the System Audio Control function is active, and the output method changes from the TV speaker to the speakers connected to the receiver automatically, loud sound may be output depending on the volume level of the receiver. You can prevent this by limiting the maximum volume level. 1 Press AMP MENU. "LEVEL" appears on the display. 2 Press V/v repeatedly until "SET HDMI" appears, then press or b. 3 Press V/v repeatedly until "VOL LIMIT" appears, then press or b. 4 Press V/v repeatedly to select the maximum volume level you want, then press . The maximum volume level changes as follows: LIMIT MAX y LIMIT 49 y LIMIT 48 y ...... y LIMIT 2 y LIMIT 1 y LIMIT MIN 5 Press AMP MENU. The AMP menu turns off. Notes • This function is available only when the Control for HDMI function is set to on. • This function is not available when the output method changes from the speakers connected to the receiver to the TV speaker. Tips • Sony recommends that you set the maximum volume level to a little lower than the volume you usually listen to. • Regardless of the maximum volume level you set, the MASTER VOLUME on the receiver and the MASTER VOL +/- on the remote are operable. • If you do not want to limit the maximum volume level, select "LIMIT MAX". 42US