Sony HT-SF470 Operating Instructions - Page 9

About the indicators on the display 123 4 5 6 LPCM NIGHT SLEEP HDMI COAX OPT TUNED ST S-AIR 78 MUTING DTS qa q; 9 Name A LPCM B NIGHT C SLEEP D Input indicators Function Lights up when Linear PCM (Pulse Code Modulation) signals are input. Lights up when the Night Mode function is set to on (page 34). Lights up when the sleep timer is activated (page 62). Light up when the digital signal is input. HDMI COAX OPT E Tuning indicators Digital signal is input through the HDMI IN jack. Digital signal is input through the COAX IN jack. Digital signal is input through the OPT IN jack. Light up to indicate the current status of the radio station (page 35). TUNED ST When receives a radio station. When broadcasts in stereo mode. F S-AIR Lights up when the S-AIR transmitter (not supplied) is connected. G MUTING Lights up when the muting function is activated. H DTS Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections. I Message Displays the volume level, display area selected input source, audio input signal, etc. Name J D K Dolby Pro Logic indicators Function Lights up when the receiver is decoding Dolby Digital signals. Note When playing a Dolby Digital format disc, be sure that you have made digital connections. Lights up one of the respective indicators when the receiver applies Dolby Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. PL Dolby Pro Logic PLII Dolby Pro Logic II continued 9US