Sony ILCE-6500 Help Guide Printable PDF - Page 290
Multi Frame NR, ISO AUTO, ISO 100 - ISO 51200, ISO ISO on the control wheel, select desired setting.
View all Sony ILCE-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
to [ISO AUTO]. Only a value between -3.0 EV and + 3.0 EV with the equivalent image brightness appears on the screen when shooting. If you set an exposure beyond this range, the image brightness on the screen does not show the effect, but it will be reflected in the recorded image. You can adjust the exposure in a range of -2.0 EV to +2.0 EV for movies. If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory effect. [307] List of MENU items ISO Camera Settings1 Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. 1 ISO (ISO) on the control wheel → select desired setting. You can also select MENU→ (Camera Settings1) → [ISO]. Menu item details Multi Frame NR: Combines continuous shots to create an image with less noise. Press the right side to display the setting screen, then select a desired value using the top/bottom sides of the control wheel. Select the desired ISO number from ISO AUTO or ISO 100 - ISO 51200. ISO AUTO: Sets the ISO sensitivity automatically. ISO 100 - ISO 51200: Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity. Note When [ Quality] is set to [RAW] or [RAW & JPEG], [Multi Frame NR] cannot be selected. When [Multi Frame NR] is selected, the flash, [D-Range Opt.], or [Auto HDR] cannot be used. When [Picture Profile] is set to other than [Off], [Multi Frame NR] cannot be selected. When [Picture Effect] is set to other than [Off], [Multi Frame NR] cannot be selected. [ISO AUTO] is selected when using the following functions: [Intelligent Auto] [Superior Auto] [Scene Selection] [Sweep Panorama]