Sony ILCE-6500 Help Guide Printable PDF - Page 337

The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera towards a subject, or when the shutter button has been pressed all the way down without stopping halfway. When using a tripod, make sure to turn off the SteadyShot function because this can cause any malfunction when shooting. [SteadyShot Settings] will be unavailable when MENU→ set to [Off]. (Camera Settings2)→[SteadyShot] is When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual] and set [SteadyS. Focal Len.] to match the lens you are using. The current set value of the SteadyShot focal length will display to the side of . When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal length. When you set [SteadyShot] to [On]/[Off], the SteadyShot settings of the camera and lens switch at the same time. If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You cannot switch the settings using the camera. [357] List of MENU items Camera Settings2 Clear Image Zoom/Digital Zoom (Zoom) When you use a zoom function other than the optical zoom, you can exceed the zoom range of the optical zoom. 1 MENU → (Camera Settings2) → [Zoom Setting] → [On:ClearImage Zoom] or [On:Digital Zoom]. 2 When a power zoom lens is mounted, move the zoom lever or the zoom ring of the zoom lens to enlarge subjects. When you exceed the zoom range of the optical zoom, the camera automatically switches to another zoom than the optical zoom. 3 When a lens other than a power zoom lens is mounted, select MENU → (Camera Settings2) → [Zoom] → desired value. Press the center of the control wheel to exit.