Sony KD-36FS130 Operating Instructions - Page 13
Programming the Remote Control - problems
View all Sony KD-36FS130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Remote Control Programming the Remote Control If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV's remote control, use the following procedure to program the remote control. 1 Check the list of "Manufacturer's Codes" on page 12 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first. 2 Press . ✍ The and FUNCTION button flash when you press . 3 Press or FUNCTION button to indicate the type of component you want to program with the remote control. ✍ You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3. 4 Use the 0 9 buttons to enter the three-digit manufacturer's code number. 5 Press . 6 To check if the code number works, aim the TV's remote control at the component and press the green POWER button (VCR/DVD, SAT/CABLE) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer. ✍ If you have problems programming your remote control, see the remote control troubleshooting section on page 60. 11