Sony KD-36FS130 Operating Instructions - Page 62

Other Information Remote Control Problem I cannot operate the remote control I cannot change channels with the remote control I lost the remote control Possible Remedies ❏ Press TV (FUNCTION) when operating your TV. ❏ Check the orientation of the batteries. ❏ Batteries could be weak. Replace them (page 8). ❏ Move the TV three to four feet away from fluorescent lights. ❏ Make sure you have not inadvertently switched your TV from the channel 3 or 4 setting if you are using another device to change channels. ❏ If you are using another device to control channels, be sure that you have pressed the FUNCTION button for that device. For example, if you are using your VCR to control channels, be sure to press the FUNCTION button. ❏ You can use the front panel controls to access your menus, change channels, adjust the volume, or change video inputs (page 8). Contact your nearest Sony Dealer to order a replacement. To find out the nearest dealer, please call our Sony Direct Accessory and Part Center at 1-800-488-7669 (U.S. residents only). Programming The Remote Control Problem More than one code is listed I entered the wrong code number I cannot operate a component with the remote control When I changed the batteries, the code numbers changed back to the factory settings Possible Remedies ❏ Try entering them one by one until you come to the correct code for your component. ❏ If you enter a new code number, the code number you previously entered at that setting is erased. To reenter the correct code number you must reprogram the remote control. ❏ Use the component's own remote control. ❏ Reprogram the remote control. 60