Sony KD-36FS130 Operating Instructions - Page 64

Other Information Audio Problem Good picture, no sound Low or no audio (TV and cable box) Possible Remedies ❏ Press so that Muting disappears from the screen. Check your Audio settings. Your TV may be set to Auto SAP in the MTS feature (page 39). ❏ Make sure the Speaker option is set to On in the Audio menu. ❏ Press VOL+ to adjust your TV's volume. ❏ Some cable boxes have volume level controls. Check and see if your cable box remote has a volume control. Channels Problem Possible Remedies I cannot receive ❏ higher number channels (UHF) when ❏ using an antenna Make sure Cable is set to Off in the Channel Setup menu (page 41). Perform Auto Program to add channels that are not presently in memory (page 27). Cable stations don't seem to work ❏ Make sure Cable is set to On in the Channel Setup menu (page 41). ❏ Perform Auto Program to add channels that are not presently in memory (page 27). I have no digital channels ❏ You may not have any digital channels available. Try running the Auto Program feature to search for digital channels (see ANALOG page 55). If there are none available, press the / DIGITAL button to switch to analog mode. Contacting Sony Before calling our Customer Information Services Center, reset the TV to factory settings (see page 27). Please have your TV serial number ready. The number is located on the rear of your TV and on the front cover of this manual. Our Customer Information Services Center phone number is 1-800-222-SONY (7669) (US residents only) or 1-877-899 SONY (7669) (Canadian residents only). 62