Sony KD-36FS130 Operating Instructions - Page 18
Basic Connections
View all Sony KD-36FS130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Basic Connections TV with Cable, Indoor, or Outdoor Antenna Depending on the cable system available in your home, choose one of the connections below: Use option A to connect the TV to a cable system or an antenna with a 75-ohm cable (usually built into newer homes). Connections ✍ Converter EAC-25 is commercially known as a 300-to-75 ohm antenna adapter. Use option B to connect the TV to a dipole antenna, also known as a "rabbit ears antenna" (usually found in older homes). ✍ If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for the best reception. Connecting Two RF Inputs If you want to watch RF signals for both antenna (over-the-air) and cable broadcast signals, you'll need to use an optional A-B switch for RF inputs (not supplied), as shown below. Cable Antenna A/B RF Switch A B Use the A-B selector to switch between the over-the-air signals and the cable signals. Then set the Cable setting in the Channel Setup menu to On or Off, as described on page 41. ✍ For best results, be sure to use an RF switch, as shown above, instead of a simple splitter. 16