Sony MZ-R700 Digital PCLink Operating Instructions - Page 4

Getting Started Getting your Digital PCLink going is as simple as plugging it into a primary USB port of any computer running Windows 98, Windows Me, Windows 2000, or Mac OS 9.04. There's no need to load any special software, but you will have to follow a few simple steps. After you have finished these steps, make sure to read our tips on recording before launching into a full session. Windows 98/Me(Millennium edition)/ 2000 Users Windows Installation Windows 98 installation Note Some computer systems ship with an OEM version of Windows 98 that does not contain the entire generic USB driver and audio platform. If you experience any trouble loading the USB drivers, please refer to the troubleshooting section at the end of this user manual for further instructions. 1 There is no need to turn your computer off when plugging the Digital PCLink in for the first time. Locate your computer's USB port and plug the supplied USB cable in. Now plug the Digital PCLink into the other end of the USB cable. 2 Windows 98 will open an Add New Hardware Wizard and let you know it is found the Digital PCLink. It will then start loading drivers for a USB Composite Device, USB Human Interface Device, or USB Audio Device, depending on what components have previously been installed on your system. Click Next. 3 Check the option Search for the best driver for your device (Recommended) and click Next. 4