Sony NEX-5N Instruction Manual - Page 23

Attaching the flash, Attach the flash to the Smart, Accessory Terminal 2 of the, camera.

Get Sony NEX-5N PDF manuals and user guides View all Sony NEX-5N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Preparing the camera Attaching the flash When you want to use a flash during shooting, attach the flash device (supplied). The flash is enabled when it is raised, and disabled when lowered. Set the power switch of the camera to OFF before you attach or remove the flash. 1 Attach the flash to the Smart Accessory Terminal 2 of the camera. 2 Fasten the screw to secure the flash. 3 To fire the flash, raise the flash first. • The default setting is [Autoflash]. To change the setting, see page 48. • Lower the flash when you do not intend to use it. Notes • The power for the flash is provided from the camera. When the camera is charging the flash, blinks on the LCD monitor. You cannot press the shutter button when this icon is blinking. • Plug the flash fully into the accessory terminal of the camera, and fasten the screw securely. Make sure that the flash is attached to the camera securely. GB 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
GB
23
Preparing the camera
Attaching the flash
When you want to use a flash during shooting, attach the flash device
(supplied).
The flash is enabled when it is raised, and disabled when lowered.
Set the power switch of the camera to OFF before you attach or remove the
flash.
•
The power for the flash is provided from the camera. When the camera is charging
the flash,
blinks on the LCD monitor. You cannot press the shutter button
when this icon is blinking.
•
Plug the flash fully into the accessory terminal of the camera, and fasten the screw
securely. Make sure that the flash is attached to the camera securely.
1
Attach the flash to the Smart
Accessory Terminal 2 of the
camera.
2
Fasten the screw to secure the flash.
3
To fire the flash, raise the
flash first.
• The default setting is [Autoflash].
To change the setting, see page 48.
•
Lower the flash when you do not
intend to use it.
Notes