Sony STR-DA2ES Operating Instructions - Page 46
Advanced settings
View all Sony STR-DA2ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Adjusting the equalizer (continued) EQ menu parameters x FRONT BASS XXX.X dB (Front speaker bass level) x FRONT MID XXX.X dB (Front speaker midrange level) x FRONT TREBLE XXX.X dB (Front speaker treble level) x CENTER BASS XXX.X dB (Center speaker bass level) x CENTER MID XXX.X dB (Center speaker midrange level) x CENTER TREBLE XXX.X dB (Center speaker treble level) x SURROUND BASS XXX.X dB (Surround speaker bass level) x SURROUND TRE. XXX.X dB (Surround speaker treble level) x SUR.BACK BASS XXX.X dB (Surround back speaker bass level) x SUR.BACK TRE. XXX.X dB (Surround back speaker treble level) Initial setting: 0 dB You can adjust from -10 dB to +10 dB in 0.5 dB steps. To apply equalization Press EQUALIZER. Each press turns the equalizer on or off. The EQ indicator lights when the equalizer is on. For advanced EQ menu adjustments Use the CUSTOMIZE menu and set "MENU EXPAND" to "ON" to enable advanced adjustments. For details on "MENU EXPAND", see page 46. For details on how to set the items, see page 55. Advanced settings Using the CUSTOMIZE menu to adjust the receiver You can adjust various receiver settings using the CUSTOMIZE menu. 1 Press CUSTOMIZE. The CUSTOMIZE menu appears in the display. 2 Press the cursor buttons ( or ) to select the parameter. For details, see "CUSTOMIZE menu parameters" below. 3 Turn the jog dial to adjust the selected parameter. 4 Repeat steps 2 and 3 to adjust the other items. CUSTOMIZE menu parameters The initial setting is underlined. x MENU EXPAND (Menu expanding) • ON The advanced parameters for the SET UP, SURROUND, LEVEL, and EQ menus are displayed and can be adjusted. For details on each setup items, see pages 21, 43-45 and the following pages. • OFF The advanced parameters are not displayed. x dts 96/24DEC. (DTS 96/24 decoding mode) • AUTO When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies. • OFF Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies. Note This parameter is valid only in the AUTO DECODING mode (page 34). In other sound fields, this parameter is always set to "OFF". 46GB