Sony STR-DA2ES Operating Instructions - Page 69

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09 % total harmonic distortion from 250 milliwatts to rated output. Amplifier section POWER OUTPUT Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 20 Hz - 20 kHz, THD 0.09 %) 100 W + 100 W (4 ohms 20 Hz - 20 kHz, THD 0.09 %) 80 W + 80 W Reference Power Output (8 ohms 20 Hz - 20 kHz, THD 0.09 %) FRONT1):100 W + 100 W CENTER1): 100 W SURR1): 100 W + 100 W SURR BACK1): 100 W (4 ohms 20 Hz - 20 kHz, THD 0.09 %) FRONT:1) 80 W + 80 W CENTER1): 80 W SURR1): 80 W + 80 W SURR BACK1): 80 W Models of other area code Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %) 100 W + 100 W2) (4 ohms 1 kHz, THD 0.7 %) 90 W + 90 W2) Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %) FRONT1): 100 W + 100 W CENTER1): 100 W SURR1): 100 W + 100 W SURR BACK1): 100 W (4 ohms 1 kHz, THD 0.7 %) FRONT1): 90 W + 90 W CENTER1): 90 W SURR1): 90 W + 90 W SURR BACK1): 90 W (8 ohms 20 Hz - 20 kHz, THD 0.09 %) FRONT1): 90 W + 90 W CENTER1): 90 W SURR1): 90 W + 90 W SURR BACK1): 90 W (4 ohms 20 Hz - 20 kHz, THD 0.09 %) FRONT1): 80 W + 80 W CENTER1): 80 W SURR1): 80 W + 80 W SURR BACK1): 80 W 1) Depending on the sound field settings and the source, there may be no sound output. 2) Measured under the following conditions: Area code Power requirements E 240 V AC, 50 Hz SP, CEL, CEK, KR 230 V AC, 50 Hz continued Additional Information 69GB