Sony STRDG820 Operating Instructions - Page 18
Selecting a speaker pattern, SPEAKER menu
UPC - 027242727465
View all Sony STRDG820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
a)If you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals. You can select the front speakers you want to use with the SPEAKERS (OFF/A/B/A+B) button on the receiver (page 30). b)If you connect only one surround back speaker, connect it to the SPEAKERS SURROUND BACK L terminals. c)When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output. Note Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. Selecting a speaker pattern After you have install and connect your speaker, be sure to select the speaker pattern from SPEAKER menu (page 44). Select the speaker pattern according to your speaker setting. For details of each parameter, see the table as follows. Speaker pattern 3/4.1 3/4 3/3.1 3/3 2/4.1 2/4 3/2.1 3/2 2/3.1 2/3 2/2.1 2/2 3/0.1 3/0 2/0.1 2/0 Front Center left/right Speaker connected Surround Surround Surround Subwoofer left/right back left back right a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a 18US