Sony STRDG820 Operating Instructions - Page 37

Getting Started 9: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. SHIFT TV AMP Input buttons 1 VIDEO 1 4 DVD 7 -/-- 2 VIDEO 2 5 SAT 8 SA-CD/ CD 0/10 CLEAR/>10 XM 3 BD 6 TV 9 TUNER ENT/MEM DMPORT 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT AUTO CAL MODE SLEEP MODE DISPLAY AMP MENU 1 2-5 MASTER VOL +/- O RETURN/ EXIT HOME MENU OPTIONS TOOLS - CATEGORY + .< > < TUNING - CATEGORY MODE TUNING + m M DISC SKIP X D.TUNING x TV VOL TV CH MASTER VOL PRESET MUTING BD/DVD 1 Press AMP MENU. 2 Press V/v repeatedly to select "LEVEL", then press or b. 3 Press V/v repeatedly to select "TEST TONE" then press . 4 Press V/v to select the test tone type and the speaker you want to adjust. You can select "FIX" or "AUTO". For details, see "TEST TONE (Test tone)" (page 46). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value are shown on the display during adjustment. 5 Repeat steps 1 to 4 to select "OFF". You can also press any input buttons. The test tone turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker indicator showed in the front panel display. The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match. 37US