Sony STRDG820 Operating Instructions - Page 90
Using the Remote, Programming the remote - parts
UPC - 027242727465
View all Sony STRDG820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Using the Remote Programming the remote You can program the remote to control nonSony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. 1 Press AV ?/1 while pressing RM SET UP. The RM SET UP button slowly flashes. 2 Press the input button for the component you want to control. For example, if you are going to control a CD player, press SA-CD/CD. The RM SET UP and the SHIFT button indicator light up. 3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control (except TV). See the tables on page 91-94 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker's code respectively). 4 Press ENT/MEM. Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode. 5 Repeat steps 1 to 4 to control other components. Notes • The indicator turns off while a valid button is pressed. • In step 2, if you want to change to other input, press SHIFT and then press the new input buttons you want. • In step 2, if you press TUNER, you can only program the button to control a tuner (page 94). • For the numeric codes, only the last three numbers entered are valid. To program the remote to control a TV 1 Press AV ?/1 while pressing RM SET UP. The RM SET UP indicator slowly flashes. 2 Press TV. The RM SET UP and the SHIFT button indicator light up. 3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) for TV. For details, see page 93. 4 Press ENT/MEM. Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode. To cancel programming Press RM SET UP during any step. The RM SET UP indicator flashes 5 times in quick succession. The remote automatically exits the programming mode. To activate the input after programming Press the programmed button to activate the input you want. 90US