Sony SVR-2000 Setup Guide - Page 10

Back Panel This section provides a brief explanation of the jacks and switch on the back panel and where they are located. You can find detailed information about each jack and switch, and how it is used, on the page number indicated in parentheses. 12 3 4 AC In 9 Phone Cntrl Line Out Inputs Serial IR Audio R L Video S-Video Outputs RF In S-Video Ch 3 | 4 RF Out 87 65 1 Cntrl (control) Out Serial jack Connect to your satellite set-top box so the SVR Recorder can change channels on your satellite set-top box (see page 35). B A/V Input jacks a) Connect the right (red) and left (white) jacks to the cable box or satellite receiver audio output jacks of the same color (see page 36). b) Connect the composite video (yellow) jack to the cable box or satellite receiver composite video output (see page 36). c) Connect the S-Video jack to the cable box or satellite receiver S-Video output jack if available. This connection provides a better picture than the composite video connection (see page 37). C A/V Output jacks a) Connect the right (red) and left (white) jacks to the TV, VCR and/ or audio system audio input jacks of the same color (two sets available) (see page 37). b) Connect the composite video (yellow) jack to the TV and/or VCR composite video input (two jacks available) (see page 37). c) Connect the S-Video jack to the TV S-Video input jack if available. This connection provides a better picture than the composite video connection (see page 37). 10 Parts, Controls, and Functions D RF In Connect to your off-air antenna or cable service if you do not have a digital satellite receiver or cable box so the SVR Recorder can receive sound and pictures (see page 38). E RF Out Connect to your TV if your TV does not have A/V inputs so you can view sound and pictures (see page 38). F Ch 3|4 switch Set to the channel that does not broadcast a station in your area. Tune your TV to this channel to view sound and pictures from the SVR Recorder if you connected your TV using RF Out (see page 38). G Cntrl (control) Out IR jack Connect to your satellite or cable set-top box so the SVR Recorder can change channels on your satellite or cable set-top box (see page 35). H Phone Line jack Connect to your phone line so the SVR Recorder can receive program and other information from the TiVo Service (see page 35). I AC~In jack Connect to an AC power outlet so the SVR Recorder can receive power (see page 35).