Sony SVR-2000 Setup Guide - Page 34
Connect the SVR Recorder to your telephone line., Plug in the SVR Recorder power., Guided Setup. - power cord
UPC - 027242566026
View all Sony SVR-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4 Connect the SVR Recorder to your telephone line. Connect the SVR Recorder to your home telephone line. Use the phone cord (supplied). If you do not have a spare telephone jack for the SVR Recorder, you can plug the phone splitter (supplied) into your telephone jack. Then plug your phone into one of the splitter's jacks and the SVR Recorder into the other. 5 Plug in the SVR Recorder power. Now you should have everything connected and ready to go. Check all the connections one more time, then turn on your TV equipment. To turn on the SVR Recorder, plug the power cord into the back of the SVR Recorder. After a few moments, you should see TiVo's Welcome Screen. If you do not, you may need to change channels or change which input your TV uses. If you used RF Coaxial cable in step 3, make sure you're viewing the same channel (3 or 4) that you selected. If you're using S-Video or Audio/Video cables, you'll need to change your TV so that it displays the appropriate input. On some TVs, you need to use the "Input" button to switch inputs; other TVs might label this the "Select" or "Video" button. Other TVs require that you keep changing channels until the alternate input is displayed. If you have trouble, double-check your connections and look for help in Additional Information (see pages 55-60). 6 Guided Setup. Once you see the Welcome to TiVo! screen, continue with the instructions in Setting Up Your System on pages 41-54 to set up and activate the TiVo Service. 34 Continuing Your Connection Steps