Sony SVR-2000 Setup Guide - Page 49

IR Picking List. This screen presents a list of IR codes superimposed over Live TV. Each code has a fast, medium, and slow choice. First, find a code that works, then try the different speeds for that code. Use the fastest speed that changes the channels correctly every time. Use the UP/DOWN arrows to move the highlight bar down the list of codes. For each code, press the CH (channel) +/- buttons 10-15 times. Pay close attention to how well the code you're testing changes channels. When you find the code that works best, press SELECT to choose that code. Program Call. The last step of Guided Setup is to make a second call to get the program guide listings. Press SELECT to start the call, which will use the telephone for about 10-20 minutes. During this call, the TiVo Service downloads all your program guide information for the next two weeks. Immediately following the call, the SVR Recorder spends 1-2 hours sorting and indexing the data so that it can be searched. The more channels you receive, the longer it takes to sort the information. If you need to use the phone during the program call, simply pick up the telephone and the SVR Recorder will hang up. You will then need to repeat the program call when you are done using the phone line. If the Recorder repeatedly reports a busy signal trying to connect, try choosing a different local dial-in number, or try making the call during off-peak hours. Congratulations! When the SVR Recorder has finished importing and indexing your program guide information, it will beep three times. Press SELECT to continue, and you'll see the Congratulations! screen shown at left. Guided Setup 49 Setting Up Your System