Sony XAV-V631BT Operating Instructions - Page 9
Connecting a USB Device, Connecting Other Portable Audio/Video Devices, Connecting Rear View Camera
View all Sony XAV-V631BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Note While connecting to a BLUETOOTH device, this unit cannot be detected by another device. To enable detection, enter the pairing mode and search for this unit from another device. To start playback For details, see "Playing a BLUETOOTH Device" (page 13). To cancel pairing Perform step 5 to cancel the pairing mode after this unit and the BLUETOOTH devices are paired. Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. 1 Press HOME, then touch [Settings]. 2 Touch [Bluetooth Connection], then touch [ON]. Make sure that lights up on the status bar of the unit. 3 Activate the BLUETOOTH function on the BLUETOOTH device. 4 Operate the BLUETOOTH device to connect to this unit. or lights up on the status bar. To connect the last-connected device from this unit When the ignition is turned to on with the BLUETOOTH signal activated, this unit searches for the last-connected BLUETOOTH device, and connection is made automatically. If it does not work, touch [Reconnect] to search for the last-paired device again. If the problem is not solved, follow the pairing procedure. Note While streaming BLUETOOTH audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. To install the microphone For details, see "Installing the microphone" (page 34). Connecting a USB Device 1 Turn down the volume on the unit. 2 Connect the USB device to the unit. To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied). Connecting Other Portable Audio/Video Devices 1 Turn off the portable audio/video device. 2 Turn down the volume on the unit. 3 Connect the portable audio/video device to the AUX input jack on the unit with a connecting cord (not supplied). 4 Press HOME, then touch [AUX]. To match the volume level of the connected device to other sources Start playback of the portable audio/video device at a moderate volume and set your usual listening volume on the unit: Touch , then set [Input Level] between -10 and +15. To set to the device type manually Touch , then set [AUX Input] to [Audio], [Video], or [Auto]. Connecting Rear View Camera By connecting the optional rear view camera to the CAMERA IN terminal, you can display the picture from the rear view camera. For details, see "Connection/Installation" (page 31). 9GB