TEAC CD-X10I Owners Manual - Page 13

Headphones For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume using the VOLUME buttons. The sound from the speakers is cut off while the headphone jack is inserted. Sleep Timer You can set a sleep timer so the unit turns itself off after a specified time. Press the SLEEP button repeatedly until desired time appears on the display. SLEEP 90, 60 or 30: The power will be switched off 90, 60 or 30 minutes later. CAUTION Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do not place your headphones on your head until after you have plugged them in. SLEEP 00: The sleep timer is off. < If you want to check the remaining time, press the SLEEP button once. The remaining time will be displayed for a few seconds. Muting To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound. Tone Control < The MUTING indicator lights and the volume level blinks on the display to indicate that the muting is engaged. < If you change the volume or source during the muting, the muting will be canceled. 1. Press the BASS or TREBLE button. To adjust the level of low frequency sound range, press the bass button. To adjust the level of high frequency sound range, press the treble button. 2. Within 5 seconds, press the VOLUME buttons to change the setting. The level can be adjusted from -5 to +5. 13