TEAC CD-X10I Owners Manual - Page 4

Contents Before Using the Unit Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Using the Unit 4 Discs 5 Connections 6 Unit Functions 8 Wall Mounting 10 Remote Control Unit 10 Getting started 11 Basic Operation 12 Listening to iPod 14 Listening to CD 16 Repeat Playback (CD 17 Shuffle Playback (CD 18 Programmed Playback (CD only 18 Listening to an External Source 20 Listening to the Radio 21 Preset Tuning 22 Setting the Clock 23 Setting the Timer 24 Troubleshooting 26 Specifications 27 Read this before operation < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The ventilation holes should not be covered. Make sure there is at least 5 cm of space on each side of the unit. Do NOT place anything on top of the unit. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on any other electronic components. < Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should fall into the unit, contact your dealer or service company as soon as possible. < When removing the power plug from a wall outlet, always pull directly on the plug. Do not pull on the line cord. < To keep the laser pickup clean, do not touch it and always close the CD door after each use. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry, lint-free cloth. < Keep this manual in a safe place for future reference. CAUTION: DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at high speeds. Do NOT lift or move the unit during playback. Doing so may damage the disc or the unit. WHEN MOVING THIS UNIT When changing places of installation or packing the unit for moving, be sure to remove the disc. Moving this unit with the disc loaded may result in malfunction or other damage. trademark of New Transducers Ltd. 4