TEAC CD-X10I Owners Manual - Page 24

TIMER / Setting the Timer 4 Press the SKIP button (.//) to set the stop time (hour), and then press the TIMER button. < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. 1 Press and hold the TIMER button for more than 2 seconds and release it when the "hour" value starts blinking. The "minutes" value starts flashing. 5 Press the SKIP button (.//) to set the stop time (minute), and then press the TIMER button. "TIMER" and "ON" indicators appear on the display. < When no button is pressed for 7 seconds, the timer setting mode will be cancelled. 2 Press the SKIP button (.//) to set the start time (hour), and then press the TIMER button. 6 Press the SKIP button (.//) to select a source (iPod, CD or TUNER), and then press the TIMER button. < You cannot select "AUX". The "minutes" value starts flashing. 3 Press the SKIP button (.//) to set the start time (minute), and then press the TIMER button. "TIMER" and "OFF" indiactors appear on the display and the "hour" value starts flashing. 24