TEAC CD-X10I Owners Manual - Page 21

Listening to the Radio FM MODE button Pressing this button alternates between STEREO mode and MONO mode. 12 3 1 Press the FUNCTION button to select "TUNER". < You can also use the FM/AM button to select "TUNER". 2 Press the FM/AM button to select a band. STEREO FM stereo broadcasts are received in stereo and the "STEREO" indicator lights in the display. < If the sound is distorted and the "STEREO" indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode. MONO To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise. If the reception is poor For the best reception, rotate the FM or the AM antenna until you get stations clearly. 3 Select the station you want to listen to (auto selection). Hold down the Skip button (.or/) until the frequency display begins to change. When a station is tuned in, the tuning process will stop automatically. < To stop the auto selection, press the Skip button (.or/). Selecting stations which cannot be tuned automatically (manual selection) When the Skip button (.or/) is pressed momentarily, the frequency changes by a fixed step. Press the Skip button (.or/) repeatedly until the station you want to listen to is found. 21