TEAC CD-X10I Owners Manual - Page 19
To check the programmed order, To add a track to the end of the program, To overwrite the program
View all TEAC CD-X10I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Press the Skip button (.or/) repeatedly to select a To check the programmed order track, then press the MEMORY button. track number program number In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. The track is programmed, and the next program number (P02) is displayed. < Repeat this step to program more tracks. < You can program up to 32 tracks. 4 When the selection of track numbers is completed, press the Play/Pause button (G/J) to start programmed playback. To add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until "- -" appears on the display. Select a track number using the Skip button (.or/) and then press the MEMORY button. The track is added to the end of the program. To overwrite the program In the stop mode, press the MEMORY button repeatedly until the program number to be changed appears on the display. Select a new track number using the Skip button (.or/) and then press the MEMORY button. < When the playback of all the programmed tracks has finished, or if you press the Stop button (H), the MEMORY indicator will go off and the program mode will be cancelled. Still the program is retained in memory. You can return to the programmed playback by pressing the MEMORY button and the Play/Pause button (G/J). < Shuffle function doesn't work during programmed playback. To clear program To clear the programmed contents, press the MEMORY and the STOP button (H) in the stop mode. < If one of the following buttons is pressed, the programmed contents will also be cleared: FUNCTION, FM/AM, STANDBY/ON < If the unit is disconnected from the power supply, the programmed contents will be cleared. 19