TEAC DM-4800 DM-4800 Effects List - Page 11

Parameter Indicator Band 1 low-pass LoPass1 filter frequency Freq Range 1.00 kHz - 10.00 kHz (1 cent steps) Band 2 HiPass2 high-pass filter Freq frequency 1.00 kHz - 10.00 kHz (1 cent steps) Band 2 low-pass LoPass2 filter frequency Freq 1.00 kHz - 10.00 kHz (1 cent steps) Band 3 HiPass3 high-pass filter Freq frequency 1.00 kHz - 10.00 kHz (1 cent steps) Band 3 low-pass LoPass3 filter frequency Freq 1.00 kHz - 10.00 kHz (1 cent steps) Effect parameter list Description Specifies the low-pass filter corner frequency. Remarks Band 1 Specifies high-pass filter Band 2 corner frequency. Specifies low-pass filter Band 2 corner frequency. Specifies high-pass filter Band 3 corner frequency. Specifies low-pass filter Band 3 corner frequency. MONO DELAY FX2.0 This mono delay enables you to set a delay time equal to twice the stereo delay time, and control various parameters related to the envelope follower. Table 1.7: Mono Delay parameters Parameter Delay time Indicator DelayTime Range 1 ms - 2700 ms (1 ms steps) Description Specifies delay time before initial echo begins. Remarks Feedback delay FbkDlyTime Linked, 1 ms - 2700 ms (1 ms steps) time Specifies delay time With Linked, all echoes after initial echo occurs. follow delay time pa- rameter setting. Feedback amount Feedback Amt 0% - 90% (1% steps) Specifies amount of audio signal returned to delay input. Feedback phase InvertFbk inversion Off, On Determines whether or not feedback signal phase will be inverted. Low shelving LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency Specifies low shelving This filter is applied to filter frequency. feedback loops. Low shelving filter gain LoShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving This filter is applied to filter gain. feedback loops. High shelving HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency Specifies high shelving This filter is applied to filter frequency. feedback loops. High shelving HiShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) filter gain Specifies high shelving This filter is applied to filter gain. feedback loops. Wet signal output pan Wet Pan 100%L - Center - 100%R (1% steps) Specifies pan for wet (delayed) audio output. Dry signal output pan Dry Pan 100%L - Center - 100%R (1% steps) Specifies pan for dry audio output. TASCAM DM-4800 Effect list 11