TEAC DM-4800 DM-4800 Effects List - Page 12

Effect parameter list Parameter Indicator Envelope target Envelope parameter Trgt Range Description Remarks WetDryMix, Output, FeedbackAmt, Wet Pan, Dry Pan, LFO Frequency, LFO Gain, HFD Frequency, HFD Gain, Both Frequency, Both Gain Selects a parameter that is influenced by envelope follower output. Parameter value will change according to value of the envelope follower. The maximum (or minimum) value will be restricted by the current parameter value (not by the parameter's maximum value). That is, adjusting the value of the selected target parameter will enable you to set the parameter value range affected by the envelope follower. Envelope attack EnvAtkTime 0 ms - 125 ms (1 ms steps) time Specifies time taken for envelope follower value to rise to a new value when signal input to envelope follower increases. Envelope release time EnvRlsTime 5 ms - 5000 ms (1 ms steps) Specifies time taken for envelope follower value to decline to a new value when signal input to envelope follower decreases. Envelope bias EnvBias 0.0% - 100.0% (0.1% steps) Specifies envelope follower output gain. You can adjust the effectiveness of the envelope follower output. This affects how the selected envelope target parameter is adjusted via the envelope parameters. Envelope mode EnvMode Off, Env Normal, Env Inverted, Gate Normal, Gate Inverted Selects type of envelope follower output. The envelope follower generates DC signals at a level that corresponds to audio input level. Refer to the table footnote a) for more information. Gate open threshold GateOpen 0.0% - 100.0% (0.1% steps) Specifies the threshold at which the envelope follower gate is open. Gate hold time GateHold 0 ms - 1000 ms (1 ms steps) Specifies the minimum time before opened gate is closed regardless of input audio level. This setting prevents unwanted noise generated by a gate that frequently opens and closes. 12 TASCAM DM-4800 Effect list