TEAC DM-4800 DM-4800 Effects List - Page 13

Effect parameter list Parameter Gate close threshold Indicator GateClose Range 0.0% - 100.0% (0.1% steps) Description Specifies the threshold at which the envelope follower gate is closed. Remarks a) In Normal Envelope mode, the envelope follower output level is relative to the audio input level. In Inverted Envelope mode, the envelope follower output level is maximized when no audio exists, and the output level declines as the audio input level rises. In Normal Gate mode, the envelope follower output level becomes zero when the audio input level does not reach the open threshold. The envelope follower level is maximized when the audio input level exceeds the gate close threshold. In Inverted Gate mode, the envelope follower output level is maximized when the audio input level does not reach the open threshold. The envelope follower level is zero when the audio input level exceeds the gate close threshold. STEREO DELAY FX2.0 This stereo delay enables you to create a multi-tap delay sound using five delay taps. Table 1.8: Stereo Delay parameters Parameter Master tap delay ratio Indicator MstrTap Ratio Range 0% - 200% (1% steps) Description Remarks Specifies delay time ratio between each tap. For example, when you are making a rhythm pattern with different tap delay settings, adjusting this ratio enables you to increase or decrease the speed of the rhythm pattern. You do not need to adjust each tap setting. Master feedback amount MstrFbk 0% - 90% (1% steps) Specifies amount of audio signal returned to delay input. Delay type Delay Type Stereo, PingPong Selects Stereo mode or PingPong mode. Low shelving LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency Specifies low shelving This filter is applied to filter frequency. feedback loops. Low shelving filter gain LoShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving This filter is applied to filter gain. feedback loops. High shelving HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency Specifies high shelving This filter is applied to filter frequency. feedback loops. High shelving HiShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) filter gain Specifies high shelving This filter is applied to filter gain. feedback loops. Tap 1 delay time Tap1 DlyTime Off - 1350 ms (1 ms steps) Specifies delay time of delay tap. With Off, no audio signal will be output from this tap delay. Tap 2 delay time Tap2 DlyTime Off - 1350 ms (1 ms steps) Specifies delay time of delay tap. With Off, no audio signal will be output from this tap delay. TASCAM DM-4800 Effect list 13