TEAC DM-4800 DM-4800 Effects List - Page 7
STEREO FLANGER FX2.0, Parameter, Indicator, Range, Description, Remarks, LoShelfFreq, LoShelfGain
View all TEAC DM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Parameter Indicator Low shelving LoShelfFreq filter frequency Range 20.000 Hz - 20.00 kHz (6 cents steps) Low shelving filter gain LoShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) High shelving HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency High shelving HiShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) filter gain Wet signal output pan Wet Pan 100%L - Center - 100%R (1% steps) Dry signal output pan Dry Pan 100%L - Center - 100%R (1% steps) R output phase Wide Mode Off, On inversion Effect parameter list Description Specifies low shelving filter corner frequency. Remarks This filter is applied to feedback loops. Specifies low shelving This filter is applied to filter gain. feedback loops. Specifies high shelving This filter is applied to filter corner frequency. feedback loops. Specifies high shelving This filter is applied to filter gain. feedback loops. Specifies pan for wet signal output to L and R channels. Specifies pan for dry signal output to L and R channels. Determines whether or not phase of right channel output will be inverted. STEREO FLANGER FX2.0 This flanger effect features stereo-in and stereoout. It uses the same algorithm as the chorus effects and the parameters are identical to the stereo chorus parameters. Table 1.4: Stereo Flanger parameters Parameter L channel LFO rate Indicator L LfoRate Range Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps) Description Specifies LFO frequency. L channel LFO L LfoDepth 0.0% - 100.0% (0.1% steps) depth Specifies LFO modulation depth. L channel pre-delay L PreDly 0 ms - 500 ms (0 ms - 9.99 ms: 0.01 ms steps; 10 ms - 99 ms: 1 ms steps; 100 ms - 500 ms: 10 ms steps) Specifies time between onset of original sound onset of the effect sound. L channel feedback amount L FbkAmt 0% - 90% (1% steps) Specifies amount of delay line output signal returned to delay line input. R channel LFO R LfoRate rate Linked, Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps) Specifies LFO frequency. R channel LFO R LfoDepth Linked, 0.0% - 100.0% (0.1% steps) depth Specifies LFO modulation depth. R channel pre-delay R PreDly Linked, 0 ms - 500 ms (0 ms - 9.99 ms: 0.01 ms steps; 10 ms - 99 ms: 1 ms steps; 100 ms - 500 ms: 10 ms steps) Specifies time between onset of original sound and onset of the effect sound. Remarks TASCAM DM-4800 Effect list