TEAC DM-4800 DM-4800 Effects List - Page 9

Parameter Cross feedback amount Indicator Fbk X-Feed Range 0% - 100% (1% steps) Output wet cross feed Wet X-Feed 0% - 100% (1% steps) Mixture Mixture 0% - 100% (1% steps) Effect parameter list Description Specifies amount of L (R) channel feedback signal sent to R (L) channel feedback path. Remarks Specifies pan for L/R wet With 0%, L channel wet channel outputs. signal is output from L channel, and R channel wet signal is output from R channel. With 100%, L channel wet signal is output from R channel and R channel wet signal is output from L channel. Specifies mix ratio of dry feedback delay signal and LFO modulation signal. COMPRESSOR FX2.0 This stereo compressor features feed forward and feedback types, and RMS and Peak level detect modes. Parameter Attack time Release time Compression ratio Threshold Compressor type Indicator Attack Release Ratio Threshold CompType Table 1.5: Stereo Compressor parameters Range 0 ms - 125 ms (1 ms steps) Description Specifies time taken for compression to be applied after input signal level exceeds userdefined threshold. Remarks 5 ms - 5000 ms (1 ms steps) Specifies time taken for compression to be released after input signal level reaches below user-defined threshold. 1:1 - 1:infinity Specifies ratio of compression applied to input signal that exceeds user-defined threshold. -40.0 dB - 0.0 dB (0.1 dB steps) Specifies signal level that triggers compressor. FeedForward, FeedBack Specifies type of compressor. With FeedForward, signal that passed level detector is compressed. With FeedBack, signal before level detector is compressed. With FeedBack, compression will be applied lightly. TASCAM DM-4800 Effect list