TEAC NR-7CD Owners Manual English Francais Espanol - Page 17

Display When the unit is turned on Input signal status This shows the input source signal status. WELCOME UNLOCK! The unit cannot synchronize with the input signal. EN NOT AUDIO! c A signal with a format that cannot be played is being received. NETWORK! TEAC NR-7CD The input source is NET, but the unit is not connected to a network. READY After messages like the above appear, the input source will be shown on the display. The input source is NET and it is connected, but no audio signal is being received. WAV 44k DSD 2.8M DSD 5.6M Input source information FLAC96k, etc. These are abbreviations of the input signal type and sampling The input source information screen will appear after turning the frequency. unit on as well as after about 10 seconds pass without operation on SBC a setting screen. AAC Display example aptX LDAC Input source name When the input source is Bluetooth, abbreviations of the codec type and sampling frequency are shown. 51 OPT1 PCM 44k - .5 Input signal status Volume oo Turning the VOLUME knob will change the volume, and the volume will appear to the right of the input signal status. Input source name This shows the name of the selected source. The names on the display correspond to the selected connectors as follows. CD CD player in this unit NET ETHERNET port, USB port COAX RCA COAXIAL digital audio input connector OPT1 Optical digital audio input connector 1 OPT2 Optical digital audio input connector 2 LINE Analog audio input connectors Volume display The volume setting shown will be enlarged when you turn this unit's VOLUME knob. Display example 60 Volume - .0dB oo When using Bluetooth, the name of the connected device is shown. 17