TEAC TN-570 Owner s Manual - Page 20

Turntable Drive system Rotation detection type high-precision control belt drive Motor DC motor Rotation speed 33 1/3 rpm, 45 rpm Rotation speed variation 0.2% Wow and flutter 0.1% SN ratio 67 dB or higher (A-weighted, 20 kHz LPF) Turntable Acrylic, 30cm (12") diameter Pedestal Artificial marble and wood Tone arm Arm type Static-balanced S-shaped tone arm Effective arm length 223 mm Stylus pressure variation range 0-5 g Suitable cartridge weight 15-23 g (including headshell) Overhang 18 mm Tracking error 3° or less Arm height adjustment range about 6 mm Cartridge Type VM (equivalent to MM) Output voltage 4.5 mV ±3 dB Stylus pressure 1.4±0.4 g Cartridge weight 6.5±0.2 g Included headshell weight 10 g (including screws, nuts and wires) oo The lifespan of a needle depends on the use conditions but is usually about 300 hours. oo The cartridge installed in this unit is equivalent to the Audio-Technica AT100E VM Type cartridge. (The replacement needle for the installed cartridge is green. It does not have an Audio-Technica mark.) Note: VM type cartridges have the same characteristics as MM type cartridges. Specifications Output voltage PHONO EQ THRU 4.5 mV ±3 dB PHONO EQ ON 230 mV (−13 dBV) Output connectors RCA USB port USB 2.0 (Full Speed) standard compliant USB connector type B USB bus power support 5 V, 500 mA oo Use a commercially-available USB cable to connect the unit to a computer to receive power from it. Sampling frequency 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz Quantization bit depth 16-bit Optical digital audio output (OPTICAL) Output 21.0 to −15.0 dBm Sampling frequency 48 kHz, 96 kHz, 192 kHz Quantization bit depth 24-bit General AC adapter power Input AC 100-240 V, 50-60 Hz Output 12 V, 500 mA Power consumption Standby 0.2 W or less On 0 2.3 W or less 33 3 W or less 45 3.25 W or less Weight 9 kg (19 7/8 lb) Operating temperature range 5°C to 35°C Dimensions (W × H × D) (including protrusions) 420 × 131.5 × 355 mm (16 5/8" × 5 1/4" × 14") oo Performance data is specified at 20°C. Included accessories Turntable mat × 1 45 RPM adapter × 1 Counterweight × 1 Headshell × 1 Audio-Technica VM Type (dual magnet) stereo cartridge (equivalent to AT100E) preinstalled Turntable × 1 Pulley cover × 1 Washers × 4 Hex wrench × 1 RCA audio cable with ground terminal × 1 AC adapter (GPE053A-V120050-Z) × 1 Owner's manual (this document, including warranty) × 1 oo Specifications and appearance are subject to change without notice. oo Weight and dimensions are approximate. oo Illustrations in this owner's manual might differ slightly from production models. 20